VME-CAN2 addresses¶
Note that the following text only shows the default configuration of the
VME-CAN2 cards. If you use vcanDrvp or vcanDrvpar instead of
vcanDrv to initialize the driver you can change the start of the address
ranges and interrupt ranges.
Card numbers¶
There are 4 possible card configurations, named 0 to 3 in this document. In a VME system each card must have a different configuration.
Interrupts¶
The VME-CAN2 card uses VME interrupt level 2. Here are the used interrupts:
configuration |
interrupts used |
|---|---|
0 |
112-115 |
1 |
116-119 |
2 |
120-123 |
3 |
124-127 |
VME Addresses¶
Depending on the configuration a card occupies different areas in VME address space. All ranges are in VME-A24 address space:
configuration |
VME addresses used (hexadecimal) |
|---|---|
0 |
C00000 - C7FFFF |
1 |
C80000 - CFFFFF |
2 |
D00000 - D7FFFF |
3 |
D80000 - DFFFFF |
